• TACKER METHOD

 1) Insert screw-ring into the Tacker loading handle.
2) Cock the Tacker by turning the handle fully counter clockwise and then fully clockwise.
3) Load the screw onto the Tacker by firmly pushing the loading button.
4) The screw is now ready to fire into the drill hole.
5) Drill hole to depth.
6) Align the screw to the hole and press firmly.
7) Fire

 

• ASSEMBLY

1) First, put the hammer and cocking system into the body and then screw the set screw through the slot (a) of the body.

2) Second, put the striking pin into the tip and screw the tip into the body.

 

• DISASSEMBLY
1) Remove the tip of the Tacker with an 8mm wrench.
2) Loosen the tip and striking pin (b)

 

• COMPLETE DISASSEMBLY
3) Remove the hammer and cocking system by loosening the set screw (a) with a 3,0 mm hexagonal wrench.
4) Add normal instrument oil into the bearing of the set screw after every washing cycle.

5) Loosen body (a), hammer (b) and cocking system (c).